Husqvarna 129DJx Owners Manual - Page 11
Assembly
![]() |
View all Husqvarna 129DJx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ASSEMBLY Fitting the loop handle • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. Fitting the suspension ring Fit the suspension ring between the rear handle and the loop handle. Position the hanging ring so that the machine is balanced and comfortable to work with. Use the harness and attach it to the suspension ring when using grass blades. Assembling and dismantling the two-piece shaft • Slide the spacer into the slot in the loop handle. Fit the nut, knob and screw. Do not overtighten. • Now adjust the trimmer to give a comfortable working position. Tighten the bolt. Fitting the J-handle WARNING! Only grass blades/grass ! cutters or trimmer heads/plastic blades may be used when the J-handle is fitted. Saw blades must never be used with the J-handle. Attach the J-handle to the loop handle using the three screws, as shown. Assembly: • Loosen the coupling by turning the knob. • Align the tab of the attachment (A) with the arrow on the coupling (B). B A • Push the attachment into the coupling until the attachment snaps into place. Now carry out fine adjustment to give yourself a comfortable working position. Tighten the screws. • Before using the unit, tighten the knob securely. English - 11
![](/manual_guide/products/husqvarna-129djx-owners-manual-6b65d8f/11.png)