Husqvarna 136LiHD45 Owners Manual - Page 20

Maintenance schedule MAINTENANCE WARNING! Always remove the battery ! before any maintenance on the machine. The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator's Manual. More extensive work must be carried out by an authorized service workshop. Maintenance Daily maintenance Clean the outside of the machine. X Check that the start and stop switch works correctly and is not damaged. X Make sure that the power trigger on rear handle and the power trigger on the front handle function correctly from a safety point X of view. Check that all controls are undamaged and in working order. X Check that the cutter and cutter guard are not damaged or cracked. Replace the cutter or cutter guard if they have been X exposed to impact or if they are cracked. Replace the cutting unit if it is bent or damaged. X Check that the hand guard is not damaged. Replace the guard if damaged. X Check that nuts and screws are tight. X Check that the battery is intact. X Check the battery's charge. X Check that the battery charger is intact and functional. X Check that the screws that hold the blades together are correctly tightened. Check the connections between the battery and the machine and also check the connection between battery and the battery charger. Weekly maintenance X Monthly maintenance X 20 - English