Husqvarna 435 Operation Manual - Page 2

KEY TO SYMBOLS Symbols on the machine: WARNING! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear: • Approved protective helmet • Approved hearing protection • Protective goggles or a visor This product is in accordance with applicable EC directives. Symbols in the operator's manual: Switch off the engine before carrying out any checks or maintenance. CAUTION! The start/stop switch automatically returns to run position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. Always wear approved protective gloves. Noise emission to the environment according to the European Community's Directive. The machine's emission is specified in chapter Technical data and on label. Both of the operator′s hands must be used to operate the chain saw. Never operate a chain saw holding it with one hand only. Regular cleaning is required. Visual check. Protective goggles or a visor must be worn. Refuelling. Contact of the guide bar tip with any object must be avoided. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. Other symbols/decals on the machine refer to special certification requirements for certain markets. Filling with oil and adjusting oil flow. The chain brake must be engaged when the chain saw is started. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. 2 - English 115 10 82-26 Rev.2 2008-06-03