Husqvarna 522HD60S Owner Manual - Page 13
To lubricate the gear housing, To clean and lubricate the blades, To examine the blades
View all Husqvarna 522HD60S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
To lubricate the gear housing • Use Husqvarna special grease. Speak to your servicing dealer for more information about recommended grease. • Add the grease through the grease nipple. To examine the blades 1. Remove the cap on the gear housing. 2. Make sure that the blades move freely. Put the combination wrench in the gear housing and turn clockwise and counterclockwise. CAUTION: Do not fill the gear housing fully. To clean and lubricate the blades 1. Clean the blades from unwanted materials before and after you use the product. 2. Lubricate the blades before long periods of storage. Note: Speak to your servicing dealer for more information about recommended cleaning agents and lubricants. 3. Examine the edges of the blades for damages and deformation. 4. Use a file to remove burrs on the blades. Transportation, storage and disposal Transportation and storage • Always allow the product to cool down before storage. • For storage and transportation of the product and fuel, make sure that there are no leaks or fumes. Sparks or open flames, for example from electrical devices or boilers, can start a fire. • Always use approved containers for storage and transportation of fuel. • Empty the fuel before transportation or before longterm storage. Discard the fuel at an applicable disposal location. • Attach the transport guard during transportation and storage. • Remove the spark plug cap from the spark plug. • Attach the product during transportation. Make sure that it cannot move. • Clean and do servicing on the product before longterm storage. 904 - 003 - 19.03.2019 13