Husqvarna 525ECS Operation Manual - Page 2

Symbols WARNING! Edgers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator's manual. KEY TO SYMBOLS Wear sturdy, non-slip boots. Air purge Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear: • Wear a protective helmet where there is a risk of falling objects • Approved hearing protection • Approved eye protection Max. speed of output shaft, rpm Watch out for thrown objects and ricochets. 10000 Other symbols/decals on the machine refer to special certification requirements for certain markets. The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap must be removed from the spark plug when assembling, checking and/or performing maintenance. Always wear approved protective gloves. Warning for rotating blade. Keep hands and feet clear. Regular cleaning is required. Warning! The blade continues to rotate even after the engine has stopped. When the engine has stopped, stop the blade from rotating by letting the blade come in contact with the ground. The operator of the machine must ensure, while working, that no persons or animals come closer than 15 meters (50 ft.). Visual check. Approved eye protection must always be used. Arrows which show limits for handle positioning. Always wear approved protective gloves. The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. 2 - English 1157435-49 Rev. 3 2016-11-09