Home » Husqvarna Manuals » Lawn & Garden » Husqvarna 535i XP » Manual Viewer

Husqvarna 535i XP Owner Manual - Page 33

Disposal of the battery, battery charger and product, Technical data, battery

Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

• Put the battery in storage where the temperature is between 5 °C (41 °F) and 25 °C (77 °F) and away from open sunlight. • Put the battery charger in storage where the temperature is between 5 °C (41 °F) and 45 °C (113 °F) and away from open sunlight. • Charge the battery 30% to 50% before you put it in storage for long periods. • Put the battery charger in storage in a space that is closed and dry. • Keep the battery away from the battery charger during storage. Do not let children and other not approved persons to touch the equipment. Keep the equipment in a space that you can lock. • Clean the product and do a full servicing before you put the product in storage for a long time. • Use the transportation guard on the product to prevent injuries or damage on the product during transportation and storage. • Attach the product safely during transportation. Disposal of the battery, battery charger and product The symbol below means that the product is not domestic waste. Recycle it at a recycling station for electrical and electronic equipment. This helps to prevent damage to the environment and to persons. Speak to local authorities, domestic waste service or your dealer for more information. Note: The symbol shows on the product or package of the product. Technical data Technical data 330i Motor Type BLDC (brushless) 36V Features Low energy mode savE Lubrication system Type of oil pump Automatic Oil tank capacity, US Pint/litre 0.42/0.2 Weight Chainsaw without battery, guide bar, saw chain and emp- 5.5/2.5 ty chain oil tank, lb/kg Water protection level IPX4 Yes Saw chain/guide bar Recommended bar lengths, inch/cm 10-14/25-35 Usable cutting length, inch/cm 9-13/23-33 Type of drive sprocket/number of teeth Spur/6 Maximum chain speed / (savE), m/s 15 (12) 535i XP BLDC (brushless) 36V savE Automatic 0.42/0.2 5.3/2.4 Yes 10-14/25-35 9-13/23-33 Spur/6 20 (15) 958 - 001 - 16.11.2018 33

Section	Page
Contents	2
Introduction	2
Intended use	2
Product description	2
Product overview	2
Symbols on the product	3
Symbols on the battery and/or on the battery charger	3
Proposition 65	4
Safety	4
Safety definitions	4
General power tool safety warnings	4
Work area safety	4
Electrical safety	4
Personal safety	4
Power tool use and care	5
Battery tool use and care	5
Service	5
Chain saw safety warnings	5
Causes and operator prevention of kickback	6
General safety instructions	6
Safety instructions for operation	6
Personal protective equipment	8
Safety devices on the product	9
Keypad	9
The automatic stop function	9
Chain brake and front hand guard	9
Power trigger lockout	10
Chain catcher	10
Right hand guard	10
Battery safety	11
Battery charger safety	11
Safety instructions for maintenance	11
Safety instructions for the cutting equipment	12
Assembly	12
To assemble the guide bar and saw chain (330i)	12
To assemble the guide bar and saw chain (535i XP)	13
To assemble a spiked bumper	14
Operation	14
To do a function check before you use the product	14
Chain oil	14
To connect the battery charger	15
To connect the battery to the battery charger	15
To start the product	15
To use the SavE function	16
To stop the product	16
What is kickback?	16
Common questions about kickback	17
To use the cutting technique	17
To cut a trunk on the ground	18
To cut a trunk with support on one end	19
To cut a trunk with support on two ends	19
To use the limbing technique	19
To use the tree felling technique	20
To keep a safe distance	20
To calculate the felling direction	20
To clear the trunk and prepare your path of retreat	20
To fell a tree	21
To make the directional cuts	21
To make the felling cut	21
To free a trapped tree	22
To cut trees and branches that are in tension	22
Maintenance	23
Introduction	23
Maintenance and checks of the safety devices on the product	23
To do a check of the front hand guard	23
To do a check of the brake trigger	24
To do a check of the power trigger lockout	24
To do a check of the chain catcher	24
To do a check of the keypad	25
To do a check of the battery and the battery compartment	25
To do a check of the battery charger	25
To clean the cooling system	25
To sharpen the saw chain	26
Information about the guide bar and saw chain	26
General information about how to sharpen the cutting teeth	26
To sharpen the cutting teeth	27
General information about how to adjust the depth gauge setting	27
To adjust the depth gauge setting	28
To tighten the saw chain	28
To tighten the saw chain (330i)	28
To tighten the saw chain (535i XP)	29
To do a check of the saw chain lubrication	29
Chain drive sprocket	30
To examine the cutting equipment for wear	30
To do a check of the guide bar	30
Maintenance schedule	31
Troubleshooting	31
Keypad	31
Battery	32
Battery charger	32
Transportation, storage and disposal	32
Transportation and storage	32
Disposal of the battery, battery charger and product	33
Technical data	33
Technical data	33
Accessories	34
Recommended cutting equipment for USA	34
Guide bar and saw chain combinations	34
Kickback information	34
Filing equipment and filing angles	34
Approved batteries for the product	35
Approved battery chargers for the product	35
Warranty	36