Husqvarna 536LiLX Operation Manual - Page 7

GENERAL SAFETY PRECAUTIONS General power tool safety warnings WARNING! Read all safety warnings and ! all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. IMPORTANT! Save all warnings and instructions for future reference. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Check before starting • Always remove the battery to prevent the machine being started by accident. Always remove the battery before any maintenance on the machine. • Before using the machine and after any impact, check for signs of wear or damage and repair as necessary. • Inspect the working area. Remove all loose objects, such as stones, broken glass, nails, steel wire, string, etc. that could be thrown out or become wrapped around the cutter or cutter guard. • Check the motor for dirt and cracks. Clean off grass and leaves from the engine using a brush. Gloves should be worn when necessary. • Check that the trimmer head is completely attached to the trimmer. • Check that the machine is in perfect working order. Check that all nuts and screws are tight. • Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked. Always use the recommended guard for the cutting attachment you are using. See chapter on Technical data. • The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least 15 metres. • Carry out an overall inspection of the machine before use. See the maintenance schedule. • National or local regulations may regulate the use. Comply to given regulations. Personal safety • The cutting tool does not stop immediately after the machine is turned off. • The machine is only design for trimming. • Keep bystanders away. • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. • This appliance is not intended for use by person (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. • Never allow children or other persons not trained in the use of the machine and/or the battery to use or service it. Local laws may regulate the age of the user. • Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons. • Keep hands and feet away from the cutting area at all times and especially when switching on the motor. • Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. • Wear personal protective equipment. See instructions under the "Personal protective equipment" heading. • Always use face or dust mask if operation is dusty. • Turn off the machine when it has to be moved. Always remove the battery when passing the machine to another person. • Transport guard must always be used for storage and transport. • Keep in mind that it is you, the operator that is responsible for not exposing people or their property to accidents or hazards. Power tool use and care • The only accessories you can operate with this product are the cutting attachment we recommend in the technical data chapter. • Never use a machine that has been modified in any way from its original specification. Never use the machine near explosive or flammable materials. • Never use a machine that is faulty. Carry out the safety checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the Maintenance heading. • Only use original spare parts. • Always ensure that ventilation openings are kept clear of debris. • Keep handles dry, clean and free from oil and grease. • All covers, guards and handles must be fitted before starting. • Only use the machine in daylight or in other well-lit conditions. • Do not overreach. Keep proper footing and balance at all times. English - 7