Husqvarna 536LiP4 Operation Manual - Page 2

KEY TO SYMBOLS Symbols on the machine: Translation of the original Swedish operating instruction. WARNING! A pole saw is a dangerous tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator's Manual. Please read the operator's manual carefully and make sure you understand the instructions before using the machine. Always wear: • A protective helmet where there is a risk of falling objects • Approved hearing protection • Approved eye protection This product is in accordance with applicable EC directives. Always wear approved protective gloves. that are touching them. If have to work within this safe distance you should always contact the relevant power company to make sure the power is switched off before you start work. This machine has a long reach. Make sure that no people or animals come closer than 15 m when the machine is running. Direction of rotation of the saw chain, running time/Idling. Symbols on the battery and/or on the battery charger: This product must be deposited at an appropriate recycling facility. (Applies to Europe only) Fail-safe transformer Wear sturdy, non-slip boots. Symbols on the product or its packaging indicate that this product cannot be handled as domestic waste. This product must be deposited at an appropriate recycling facility. (Applies to Europe only) Arrows which show limits for handle positioning. Direct current. Keep all parts of your body away from the hot surfaces. Chain oil fill. Use and store battery charger only indoors. Double insulation Other symbols/decals on the machine refer to special certification requirements for certain markets. Symbols in the operator's manual: The machine is turned on and off by pressing the on and stop button. Always remove the battery to prevent the machine being started by accident. Always wear approved protective gloves. This machine is not electrically insulated. Regular cleaning is required. If the machine touches or comes close to high-voltage power lines it could lead to death or serious bodily injury. Electricity can jump from one point to another by Visual check. arcing. The higher the voltage, the greater the distance electricity can jump. Electricity can also travel through branches and other objects, especially if they are wet. Remove the battery. IMPORTANT! Always keep a distance of at least 10 m between the Always remove the battery to prevent Li-ion machine and high-voltage power lines and/or any objects the machine being started by accident. 2 - English