Husqvarna 536LiP4 Operation Manual - Page 25

MAINTENANCE Inspection and maintenance Li-ion WARNING! Always remove the battery ! before any maintenance on the machine. IMPORTANT! Never clean the battery or the battery charger with water. Strong cleaning agents can damage the plastic. All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. Only use original spare parts. • Dismantle the clip holding the washer and the chain drive gear. • Remove the washer. • Remove the chain drive gear and replace it with a new one. Cleaning • Clean the machine after use. • Clean the oil tank vent with a brush. • Clean under the chip guard with a brush. • If the battery connector on the machine is dirty, clean it by blowing them with compressed air or use a soft brush. • Make sure the battery and battery charger are clean and that the terminals on the battery and the battery charger are always clean and dry before the battery is placed in the battery charger. Regularly check that the battery charger and the battery are intact. • Keep the battery guide tracks clean. • Clean plastic parts with a clean and dry cloth. Changing chain drive gear If you are the least unsure of how to change the drive gear, you must first contact your retailer for help. • Dismantle the nut for the chip guard and remove the guard. English - 25