Husqvarna AUTOMOWER 115H 4G Owner Manual - Page 40

Symptoms, To set the time

Get Husqvarna AUTOMOWER 115H 4G PDF manuals and user guides View all Husqvarna AUTOMOWER 115H 4G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

6.5 Symptoms If your product does not work as expected, follow the symptoms guide below. There is a FAQ (Frequently Asked Questions) on www.husqvarna.com which provides more detailed answers to a number of standard questions. Contact Husqvarna customer service if you still cannot find the reason for the fault. Symptoms Cause Action The product has difficulty docking. The guide wire is not laid in a long straight line that is far enough out from the charging station. Check that the charging station has been installed according to the instructions in To install the charging station on page 19 The guide wire is not inserted in the slot under the charging station. It is absolutely critical for operation that the guide wire is perfectly straight and is in the correct position under the charging station. Therefore make sure that the guide wire is always in its slot in the charging station. Refer to To install the guide wire on page 19. The charging station is on a slope. The product runs The product clock needs to be set. at the wrong time Place the charging station on a surface that is entirely level. Refer to To examine where to put the charging station on page 14. Set the clock. Refer to To set the time & date on page 25. The start and stop times for mowing are incorrect. Reset the start time and stop time settings for mowing. Refer to To reset the schedule setting on page 22. The product vibrates. Damaged blades lead to imbalance in the cutting system. Inspect the blades and screws and replace them if necessary. Refer to To replace the blades on page 31. Too many blades in the same position Check that only one blade is fitted at lead to imbalance in the cutting system. each screw. Different versions (thickness) of Husq- Check if the blades are of different ver- varna blades are used. sions. The product runs, but the blade disc does not rotate. The product searches for the charging station, or is driving to the starting point. No action. The blade disc does not rotate when the product is searching for the charging station. The product mows for shorter periods than usual between charges. Grass or other foreign object blocks the blade disc. The battery is spent. Remove and clean the blade disc. Refer to Clean the product on page 30. Replace the battery. Refer to Battery on page 32. 40 - Troubleshooting 982 - 003 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
6.5 Symptoms
If your product does not work as expected, follow the symptoms guide below.
There is a FAQ (Frequently Asked Questions) on www.husqvarna.com which provides more detailed
answers to a number of standard questions. Contact Husqvarna customer service if you still cannot find
the reason for the fault.
Symptoms
Cause
Action
The product has
difficulty docking.
The guide wire is not laid in a long
straight line that is far enough out from
the charging station.
Check that the charging station has
been installed according to the instruc-
tions in
To install the charging station
on page 19
The guide wire is not inserted in the
slot under the charging station.
It is absolutely critical for operation that
the guide wire is perfectly straight and
is in the correct position under the
charging station. Therefore make sure
that the guide wire is always in its slot
in the charging station. Refer to
To in-
stall the guide wire on page 19
.
The charging station is on a slope.
Place the charging station on a surface
that is entirely level. Refer to
To exam-
ine where to put the charging station on
page 14
.
The product runs
at the wrong time
The product clock needs to be set.
Set the clock. Refer to
To set the time
& date on page 25
.
The start and stop times for mowing
are incorrect.
Reset the start time and stop time set-
tings for mowing. Refer to
To reset the
schedule setting on page 22
.
The product vi-
brates.
Damaged blades lead to imbalance in
the cutting system.
Inspect the blades and screws and re-
place them if necessary. Refer to
To re-
place the blades on page 31
.
Too many blades in the same position
lead to imbalance in the cutting system.
Check that only one blade is fitted at
each screw.
Different versions (thickness) of Husq-
varna blades are used.
Check if the blades are of different ver-
sions.
The product runs,
but the blade disc
does not rotate.
The product searches for the charging
station, or is driving to the starting
point.
No action. The blade disc does not ro-
tate when the product is searching for
the charging station.
The product mows
for shorter periods
than usual be-
tween charges.
Grass or other foreign object blocks the
blade disc.
Remove and clean the blade disc. Re-
fer to
Clean the product on page 30
.
The battery is spent.
Replace the battery. Refer to
Battery
on page 32
.
40
- Troubleshooting
982 - 003 -