Husqvarna MZ6128ZT Owners Manual - Page 42

maintenance Anti-scalp rollers Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Antiscalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions. IMPORTANT INFORMATION Adjust anti-scalp rollers with the mower on a flat level surface. Anti-scalp rollers can be set in three positions: • Upper position 1½ to 3" (38 to 76 mm) grass. • Middle position 3" to 4½" (76 to 114 mm) grass. • Lower position 4½" to 6" (114 to 152 mm) grass. The rollers should be approximately ¼" (6.5 mm) from ground. Do not adjust the rollers to support the deck. Anti-scalp rollers IMPORTANT INFORMATION The anti-scalp rollers must not be used for gauge wheels or the roller and deck may be damaged. 8058-054 42