Husqvarna MZ6128ZT Owners Manual - Page 44
LUBRICATION, Lubrication Schedule
View all Husqvarna MZ6128ZT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Lubrication Schedule LUBRICATION 8058-056 12/12 Every year 1/52 Every Week 1/365 Every day Lubricate with grease gun Oil change Level check Filter change * Change hydraulic drive filters. p See Engine Manufacturer's manual General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be filled with engine oil. When lubricating with grease, unless otherwise stated, use high grade molybdenum disulphide grease. For daily use, the machine should be lubricated twice weekly. Wipe away excess grease after lubrication. It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen, attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other petroleum products must not be used to clean belts. 44