Husqvarna PZ 72 Owners Manual - Page 42
Parking Brake, Parking Brake Adjustments
View all Husqvarna PZ 72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
maintenance Parking Brake Visually check that no damage is found on the lever, links, or switch belonging to the parking brake. Perform a standstill test and check that there is sufficient braking action. WARNING! Faulty adjustment result in reduced braking ability and can cause an accident. IMPORTANT INFORMATION The machine must be standing still when applying the parking brake. Parking brake Parking Brake Adjustments 1. Using a jack stand, raise the rear of the mower up off the ground. Make sure the machine is securely supported. 2. Remove the rear tire assemblies. 3. Release the park brake. 4. Measure the distance from the swivel to the washer. (See Illustration). The measurement should be 1¾" on both the right and left side brake linkage assemblies. 1¾" 1 2 1. Swivel 2. Washer Parking brake adjustment 8065-006 8065-051 42