Husqvarna RZ46215 Owners Manual - Page 20
Ignition Switch, Choke Control, Fuse, For cold starts the control should be pulled up.
View all Husqvarna RZ46215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
CONTROLS Ignition Switch The ignition switch is placed on the control panel and is used to start and stop the engine. On models equipped with headlights, turn the key clockwise to ACCESSORY for headlight use. Ignition switch Choke Control The choke control is used for cold starts to provide the engine with a richer fuel mixture. For cold starts the control should be pulled up. Choke control Fuse The 20 amp primary fuse is located on the left hand side of the machine. It is accessed by tilting the seat forward. The fuse is a flat pin type used in automobiles. Fuse 20 8052-001 8058-134 8058-234
20
CONTROLS
Ignition Switch
The ignition switch is placed on the control panel and
is used to start and stop the engine.
On models equipped with headlights, turn the key
clockwise to ACCESSORY for headlight use.
8052-001
Ignition switch
8058-134
Choke control
Choke Control
The choke control is used for cold starts to provide
the engine with a richer fuel mixture.
For cold starts the control should be pulled up.
Fuse
The 20 amp primary fuse is located on the left
hand side of the machine. It is accessed by tilting
the seat forward. The fuse is a flat pin type used in
automobiles.
8058-234
Fuse