Husqvarna RZ46215 Owners Manual - Page 23
Seat Adjustment Lever, Hour Meter, Tracking Knob, IMPORTANT INFORMATION
View all Husqvarna RZ46215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
CONTROLS Seat Adjustment Lever The seat can be adjusted lengthways. When making adjustments, the lever under the right side of the seat is pulled up, after which the seat can be moved backward or forward. IMPORTANT INFORMATION Seat should not be adjusted while unit is in motion. Hour Meter The hour meter displays the total operating time with the blade activated. The display on the hour meter will turn on the oil can icon after every fifty hours of use and will stay on for two hours or until the meter is manually reset. To manually reset the timer, turn the ignition key to the run position and then engage and disengage the blade switch five times at one second intervals. Lengthways adjustment Hour meter Tracking Knob If the mower is not tracking straight, check the air pressure in both rear tires. Recommended air pressure is 15 psi (103 kPa / 1 bar) for all tires. Tracking must be checked on a flat and level concrete or blacktop surface. Rotating the tracking knob allows fine tuning adjustments so the machine tracks straight with the steering control levers in the full forward position. Rotate the knob counter clockwise (as viewed from the operation position) to increase the speed on the left lever. Rotate clockwise to decrease speed. Tracking knob 8058-023 8058-134 8058-187 23