Husqvarna RZ46215 Owners Manual - Page 25
Before Starting, Maintenance Schedule
View all Husqvarna RZ46215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
OPERATION Before Starting 1. Read the sections on Safety and Controls before starting the machine. 2. Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section). 3. Check that there is sufficient fuel in the fuel tank. 4. Adjust the seat to the desired position. Lengthways adjustment 5. Set the deck cutting height by inserting the lift pin into the desired cut height 8058-023 Secure selected cutting height The following conditions must be fulfilled before the engine can be started: • The blade switch must be pressed downward into the disengaged position. • The parking brake must be up into the activated position. • Both steering controls must be in the locked (outer) neutral position. 8058-255 25
25
OPERATION
Before Starting
1.
Read the sections on
Safety
and
Controls
before
starting the machine.
2.
Perform the daily maintenance before starting
(see
Maintenance Schedule
in the
Maintenance
section).
3.
Check that there is sufficient fuel in the fuel tank.
4.
Adjust the seat to the desired position.
8058-255
Secure selected cutting height
5.
Set the deck cutting height by inserting the lift pin
into the desired cut height
The following conditions must be fulfilled before the
engine can be started:
•
The blade switch must be pressed downward into
the disengaged position.
•
The parking brake must be up into the activated
position.
•
Both steering controls must be in the locked
(outer) neutral position.
8058-023
Lengthways adjustment