Husqvarna Z560LS Owner Manual - Page 26

Transportation, storage and disposal

Get Husqvarna Z560LS PDF manuals and user guides View all Husqvarna Z560LS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Problem Cause The engine becomes too hot. The air filter or the cooling fins are clogged. There is overload in the engine. The airflow around the engine is not sufficient. The engine speed regulator is damaged. The oil level is too low. There is dirt in the fuel line. The spark plug is defective. The battery does not charge. The connection at the cable connectors on the battery terminals is bad. Refer to To clean the battery on page 18. The charging lead is disconnected. The charging system is defective. The product moves slowly, with The parking brake is engaged. irregular speed or not at all. The hydraulic release lever is engaged. The drive belt on the transmission is loose or damaged. There is air in the hydraulic system. The drive of the blades do not engage. The drive belt on the mower deck is loose. The electromagnetic coupling contact is loose. A fuse is blown. Refer to Fuses on page 5. The transaxle leaks oil. The seals, housing or gaskets are damaged. There is air in the hydraulic system. The cutting result is unsatisfac- The tire pressure is different on the right and left sides. Refer to Tire tory. pressure on page 19. The blades are damaged. The suspension of the cutting deck is not level. The blades are blunt. Refer to To examine the blades on page 21. The product is operated at too high forward or rearward speed. Refer to To get a good cutting result on page 15. The grass is long or wet. Refer to To get a good cutting result on page 15. There is grass blockage in the cutting deck. Refer to To clean the product on page 18. Transportation, storage and disposal Transportation • The product is heavy and can cause crush injuries. Be careful when you load it onto or off a vehicle or trailer. • Load the product in reverse on approved ramps of a maximum operation angle of 10°. Do not lift the product. • Use an approved trailer for transportation of the product. 26 2060 - 001 - 07.02.2023

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Problem
Cause
The engine becomes too hot.
The air filter or the cooling fins are clogged.
There is overload in the engine.
The airflow around the engine is not sufficient.
The engine speed regulator is damaged.
The oil level is too low.
There is dirt in the fuel line.
The spark plug is defective.
The battery does not charge.
The connection at the cable connectors on the battery terminals is bad.
Refer to
To clean the battery on page 18
.
The charging lead is disconnected.
The charging system is defective.
The product moves slowly, with
irregular speed or not at all.
The parking brake is engaged.
The hydraulic release lever is engaged.
The drive belt on the transmission is loose or damaged.
There is air in the hydraulic system.
The drive of the blades do not
engage.
The drive belt on the mower deck is loose.
The electromagnetic coupling contact is loose.
A fuse is blown. Refer to
Fuses on page 5
.
The transaxle leaks oil.
The seals, housing or gaskets are damaged.
There is air in the hydraulic system.
The cutting result is unsatisfac-
tory.
The tire pressure is different on the right and left sides. Refer to
Tire
pressure on page 19
.
The blades are damaged.
The suspension of the cutting deck is not level.
The blades are blunt. Refer to
To examine the blades on page 21
.
The product is operated at too high forward or rearward speed. Refer to
To
get a good cutting result on page 15
.
The grass is long or wet. Refer to
To get a good cutting result on page 15
.
There is grass blockage in the cutting deck. Refer to
To clean the product
on page 18
.
Transportation, storage and disposal
Transportation
•
The product is heavy and can cause crush
injuries. Be careful when you load it onto or off
a vehicle or trailer.
•
Load the product in reverse on approved ramps
of a maximum operation angle of 10°. Do not lift
the product.
•
Use an approved trailer for transportation of the
product.
26
2060 - 001 - 07.02.2023