IBM 09N4290 User Guide - Page 29
Connecting local peripheral devices
View all IBM 09N4290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Local User Console Switch Chapter 2: Installation 15 PS/2 Switch Cable Earlier-model Switch Earlier-model Switch Server 1 Server 2 Figure 2.5: Console Switch Configuration with an Earlier-model Switch 1. Mount the earlier-model switch into the rack according to the instructions included with that device. 2. Attach the keyboard, monitor, and mouse connectors of the switch cable to the local port on the tiered switch. 3. Connect the RJ-45 connector on the PS/2 switch cable to an ARI port on the back of the console switch. 4. Connect the servers to the tiered switch according to the instructions included with that device. 5. Power cycle the tiered switch to enable its local port to recognize the switch cable. 6. Repeat steps 2 to 5 for all tiered switches you want to attach to the system. Connecting local peripheral devices 1. Select the keyboard, monitor, and mouse to be connected to local user A.