IBM 09N4290 User Guide - Page 42
Setting console switch security, Setup, Security, Repeat
View all IBM 09N4290 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
28 IBM Console Switch Installation and User's Guide Setting console switch security The OSCAR interface enables you to set security on the local port console. You can establish a screen saver mode that engages after the console switch remains unused for a specified Inactivity Time. Once engaged, the console switch will remain locked until you press any key or move the mouse. You will then need to type in the password to continue. Use the Security window to lock the console switch with password protection, set or change the password, and enable the screen saver. NOTE: If a password has been previously set, you will have to enter the password before you can access the Security window. Accessing the Security window 1. Press Print Screen to launch the OSCAR interface. The Main window opens. 2. Click Setup - Security. The Security window opens. Figure 3.10: Security Window Setting or changing the password 1. Click in the New field and press Enter or double-click in the New field. 2. Type the new password in the New field and press Enter. Passwords must contain alphanumeric characters, are case sensitive, and can be up to 12 characters. Valid characters are: A to Z, a to z, 0 to 9, space, and hyphen. 3. In the Repeat field, type the password again and press Enter. 4. Click OK and then close the window. NOTE: If you lose or forget the password, call technical support. See "Appendix C: Technical Support" for contact information.