IBM 28P1938 User Guide - Page 28

IBM Infoprint 1130/1140 2. Diagnostic Information Start CAUTION: Remove the power cord from the printer or wall outlet before you connect or disconnect any cable or electronic board or assembly for personal safety and to prevent damage to the printer. Use the handholds on the side of the printer. Make sure your fingers are not under the printer when you lift or set the printer down. Use the service error code, user status message, user error message, symptom table, service checks, and diagnostic aids in this chapter to determine the corrective action necessary to repair a malfunctioning printer. Service error codes are indicated by a three-digit error code. If a service error code is displayed, go to the "Service Error Codes" on page 2-2. User status messages provide the user with information on the current status of the printer. Ready is displayed on the first line of the display unless Power Saver is invoked, and then Power Saver is displayed. If a user status message is displayed, go to the "User Status Screens" on page 2-24. User error messages are indicated by a two or three-digit error code that provides the user with information that explains a problem with a print cartridge, paper jam, option, port, and so on. If a user error message is displayed, go to the "User Attendance Messages" on page 2-29. If your machine completes the "Power-On Self Test (POST)" on page 2-41 without an error, and you have a symptom, go to the "Symptom Tables" on page 2-42. Locate your symptom and take the appropriate action. If a service error code appears while you are working on the machine, go to the "Service Error Codes" on page 2-2 and take the indicated action for that error. Diagnostic Information 2-1