IBM 28P1938 User Guide - Page 41
x1=Leading Edge of Media State, x2=Trailing Edge of Media, x1=Media Size
![]() |
View all IBM 28P1938 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
IBM Infoprint 1130/1140 First 6 Bytes Sub Error Code Data - Note: xx can be any value. Explanation 84 xx 20 x1 The imaged page is not the expected page. x2 (x1=Media Size, x2=Media Source) 84 xx 21 x1 x2 Check the pass thru sensor to make sure it is operating properly. If no problem is found, it may be necessary to try a new pass thru sensor. The smart tray x did not pick a sheet of paper. (x1=Media Size, x2=Media Source) 84 xx 22 x1 x2 84 xx 23 x1 x2 84 xx 25 84 xx 26 Check tray x auto compensator and tray parts for correct operation. If no problem is found, go to the "Input Tray(s) Option Service Check" on page 2-69. This code indicates that the media activated the input sensor before the printer EP was ready. (x1=Leading Edge of Media State, x2=Trailing Edge of Media State) The transfer servo never started. (x1=Media Size, x2=Leading Edge of Media State) This code indicates that the media has activated the input sensor before the printhead has locked. Enough time has elapsed since printhead start to expect a lock. One of the following may be failing: *Printhead Assembly *System Board *Printhead Cables This code indicates that media has activated the input sensor; however, the printhead fell out of lock condition or not enough time elapsed since the printhead start to expect a stable lock. The media may have also reached the input sensor early. 2-14 Service Manual
![](/manual_guide/products/ibm-28p1938-user-guide-bbecc3e/41.png)