IBM 560E Hardware Maintenance Manual - Page 24
FRU / Action in Sequence, Go to Memory
View all IBM 560E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Symptom / Error 111 (I/O parity.) 127 (Cache error) 158 (Hard disk password was not set even though the supervisor password is set.) 159 (Hard disk password is not set the same as the supervisor password.) 161 (Dead battery.) 163 (Time and date were not set.) 173 (Configuration data was lost.) 174 (Configuration error: Perform"Checking the Installed Devices List" on page 35 before changing any FRUs.) 175, 177, 178 175 EEPROM CRC #1 error. 177 Supervisor password check sum error. 178 EEPROM is not functional. 183 (Incorrect password entered at the supervisor password prompt.) 184 (Power-on password check sum error.) FRU / Action in Sequence 1. Go to "Memory Checkout" on page 12. 2. Port replicator. 3. System board. 1. CPU mini-cartridge. 2. System board. 1. Set the password for hard disk drive. 1. Set the correct password for hard disk drive. 1. Go to "Checking the Backup Battery" on page 16. 2. Backup battery. 3. System board. 1. Set time and date. 2. System board. 1. Select OK in the error screen; then set the time and date. 2. Backup battery. 3. System board. 1. Check device configuration. 2. Hard disk drive assembly. 3. System board. 1. System board. 1. Have the user examine the password. 1. Reset the power-on password in Easy-Setup. 22