IBM 8670 Installation Guide - Page 16
Hot-swap power supplies, Integrated functions - pci slots
View all IBM 8670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Table 1. Features and specifications Microprocessor: v Intel® Xeon™, 3.067 GHz or higher depending on server model v 533 MHz front-side bus (FSB) v Support for up to two microprocessors with Intel Hyper-Threading technology Memory: v Minimum: 512 MB, expandable to 8 GB v Type: PC2100 (CL2.5), downward compatible with PC1600 (CL2), registered, ECC, double data rate (DDR), SDRAM v Sizes: 256 MB, 512 MB, 1 GB, or 2 GB, in pairs v Connectors: Two-way interleaved, four dual inline memory module (DIMM) connectors v Maximum: Two pairs of DIMMs Drives: v Diskette: 1.44 MB v CD-ROM: IDE Expansion bays: v Six hot-swap, slim-high, 3.5-inch drive bays (hot-swap hard disk drives installed, some models) v One 5.25-inch bay (CD-ROM drive installed) v One 3.5-inch removable-media drive bay (diskette drive installed) Expansion slots: v Two PCI-X non-hot-plug 133 MHz/64-bit v Two PCI-X non-hot-plug 100 MHz/64-bit (low profile) v One PCI non-hot-plug, 33 MHz/32-bit Hot-swap power supplies: 514 watts (115-230 V ac) v Minimum: One v Maximum: Two - provide redundant power Size (2 U): v Height: 85.4 mm (3.36 in.) v Depth: 698 mm (27.48 in.) v Width: 443.6 mm (17.5 in.) v Weight: approximately 21.09 kg (46.5 lb) to 28.12 kg (62 lb) depending upon configuration Integrated functions: v IBM integrated system management processor (ISMP) - Service processor with Light Path Diagnostics™ - Interconnect port - Dedicated I/O port - Support for IBM Remote Supervisor Adapter v Two 10BASE-T/100BASE- TX/1000BASE-T Ethernet ports (Intel Ethernet controller on system board) v One serial port v One external and one internal Ultra320 SCSI port (dual-channel integrated controller with RAID capabilities) v Three Universal Serial Bus (USB) v1.1 ports v Keyboard port v Mouse port v ATI Rage XL video (controller on system board) - Compatible with SVGA and VGA - 8 MB video memory Hot-swap fans: Standard: Eight - provide redundant cooling Environment: v Air temperature: - Server on: 10° to 35°C (50.0° to 95.0°F); altitude: 0 to 2133 m (6998.0 ft) - Server off: 10° to 43°C (50.0° to 109.4°F); maximum altitude: 2133 m (6998.0 ft) v Humidity: - Server on: 8% to 80% - Server off: 8% to 80% Acoustical noise emissions: v Declared sound power, idle: 6.5 bel v Declared sound power, operating: 6.5 bel Heat output: Approximate heat output in British thermal units (Btu) per hour: v Minimum configuration: 341 Btu (100 watts) v Maximum configuration: 2250 Btu (660 watts) Electrical input: v Sine-wave input (50-60 Hz) required v Input voltage range automatically selected v Input voltage low range: - Minimum: 90 V ac - Maximum: 137 V ac v Input voltage high range: - Minimum: 180 V ac - Maximum: 265 V ac v Input kilovolt-amperes (kVA) approximately: - Minimum: 0.1 kVA - Maximum: 0.7 kVA Notes: 1. Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use. 2. These levels were measured in controlled acoustical environments according to the procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate. 4 IBM xSeries 345 Type 8670: Installation Guide