IBM 88364SU User Manual - Page 30
Using, SCSISelect, Utility, program, models, Starting
View all IBM 88364SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
shown in the following illustration. Clear CMOS jumper (JP2) Complete the following steps to change the position of the clear CMOS jumper: 1. Review the safety information beginning on page v. 2. Turn off the server and peripheral devices and disconnect all power cords and external cables; then, remove the cover. Remove the riser-card assembly. See the Option Installation Guide on the IBM xSeries Documentation CD for instructions. 3. Change the position of the clear CMOS jumper to bypass the user or supervisor password check. 4. Install the riser-card assembly and the cover and connect the server to a keyboard, monitor, and mouse; then, connect the server to a power source. 5. Turn on the server. You can now start the Configuration/Setup Utility program and either delete the old password or set a new user or supervisor password. You do not need to return the jumper to the previous position. Using the SCSISelect Utility program (SCSI models only) Use the SCSISelect Utility program to configure SCSI devices. The SCSISelect Utility program is available on SCSI models only. Starting the SCSISelect Utility program Complete the following steps to start the SCSISelect Utility program: 1. Turn on the server. 2. When the prompt > appears, press Ctrl+A. If you have set a supervisor password, you are prompted to type the password. 3. Use the arrow keys to select the channel for which you want to change settings. 4. When the prompt Would you like to configure the SCSI controller, or run the SCSI Disk Utilities? appears, make your selection and press Enter. 5. Use the arrow keys to select a choice from the menu. 6. Follow the instructions on the screen to change the settings of the selected items, and press Enter. 18 xSeries 306 Type 8836: User's Guide