IBM DPSS-309170 Installation Manual - Page 13
Verify host adapter settings
View all IBM DPSS-309170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
IBM storage products Verify host adapter settings Note: The example below uses the Adaptec 2940UW controller with DPSS-318350. 1. Insert a bootable diskette into the diskette drive. 2. Turn the computer on. You should see the drive model displayed when the system is booting. 3. Verify the adapter settings. 4. Press [CTRL] [A] to enter the Adaptec SCSI setup utility. The following screen is displayed. Adaptec AHA-2940 Ultra/Ultra W BIOS v1.23 (c) 1996 Adaptec, Inc. All Rights Reserved. Press for SCSISelect (TM) Utility! SCSI ID:LUN NUMBER # : # 0:0 - IBM OEM DPSS-318350 - Drive C: (80h) CPU/CLK Math Coprocessor Fixed Disk 0 Fixed Disk 1 Fixed Disk 2 : Pentium/133MHz : Installed : None : None : None Base Memory Extended Memory Shadow RAM Internal Cache External Cache : 640 KB : 15360 KB : 384 KB : 16 KB, Enabled : 256 KB, Enabled 5. Press [CTRL] [A] to enter the Adaptec SCSI select utility. The following screen is displayed. Adaptec AHA-2940 Ultra/Ultra W SCSISelect (TM) Utility v1.23 AHA-2940 Ultra/Ultra W at Bus:Device 00:0Fh Would you like to configure the host adapter, or run the SCSI disk utilities: Select the option and press . Press to switch between color and monochrome modes. Options Configure/View Host Adapter Settings SCSI Disk Utilities IBM Technology Group Support Center Page 13 07N5612IG10