IBM IBM412 Operation Guide - Page 17
Telephone Operations Setup
UPC - 093016841200
View all IBM IBM412 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
TELEPHONE OPERATIONS SETUP LIST OF SYSTEM DEFAULTS The default telephone setup is as follows: Function Tone/Pulse Mode Headset Extension Number Ringer Line Connection Speaker Volume Handset Volume Headset Volume Ringer Volume Speed Dial Area Code Default Tone Disable 11 On - 4 lines On - 4 lines 12th level Minimum level Middle level Middle level Empty Empty You may clear all programmed data and all the parameters will revert to the above default values. To do this: 1. Press [STORE]. 2. Press 3. Press [MUTE]. 4. A short ring will be heard to signal successful programming. ASSIGNING EXTENSION NUMBERS (11 THROUGH 22) When you use two or more telephones, each telephone must be assigned a different extension number. If two stations are given the same number, you will hear a loud continuous warning alerting you to the system error. All phones arrive with the default extension number 11. Valid extension numbers are 11 through 22. To program extension numbers, follow these steps, assigning numbers sequentially to each extension: 1. Press [STORE]. 2. Press [1], [0]. 3. Enter 2 digits XX where XX is a number from 11 to 22. 4. Press [MUTE]. 5. A short ring will be heard to signal successful programming. 17