IBM SAN04B-R User Guide - Page 73
serviceable
View all IBM SAN04B-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
sfpw0001 sfpp0001 Follow the instructions in "Removing SFP modules" on page 46 and then "Installing an SFP" on page 49 to replace faulty SFPs. These instructions are intended to provide steps that will work for most types of compatible SFPs. For instructions that are specific to the exact type of SFP, refer to the manufacturer's documentation. SFPs are supplied by several different manufacturers and have different designs. Some SFPs have wire bales, as shown in Figure 14, and others have plastic tabs, as shown in Figure 15. Follow the instructions appropriate to the type of SFP you are installing. Note: The illustrations of the SFPs and cable connectors in this section are not oriented in the same direction that they are installed in the router. Figure 14. SFP wire bale variety Figure 15. SFP plastic tab variety Time required Less than 5 minutes. Items required v New SFP v New cable (if necessary) Procedure CAUTION: This product may contain one or more of the following: CD-ROM, DVD-ROM, DVD-RAM, or laser module, which are Class 1 laser products. Please note the following: v Do not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device. v Use of the controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure. (C026) Chapter 4. Removing and replacing CRUs 45