IC Realtime NVR-604V Product Manual - Page 102
Color and More Setup
View all IC Realtime NVR-604V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Please refer to the following sheet for PTZ setup information. Parameter Function Scan Preset Tour Pattern Assistant z Move the camera to you desired location and then click left limit button. z Then move the camera again and then click right limit button to set a right limit. Use direction keys to move the camera to your desired location and then input preset value. Click add button, you have set one preset. z Input auto tour value and preset value. Click add button, you have added one preset in the tour. z Repeat the above procedures you can add more presets in one tour. z Or you can click delete button to remove one preset from the tour. You can input pattern value and then click start record button to begin PTZ movement. Please go back to Figure 7-10 to implement camera operation. Then you can click stop record button in Figure 7-11. Now you have set one pattern. The assistant items include: BLC, Digital zoom, night vision, camera brightness, flip. You can select one option and then click start or stop button. Matrix Please select matrix x and then input corresponding monitor output channel number, video input channel number. Then you can click video switch button. Light/wiper You can control the light and wiper of the peripheral device. Please note the peripheral device shall support this function. 8.2.5 Color and More Setup Color and other setup interface are shown as in Figure 8-12. Figure 8-12 Color Please refer to the following sheet for detailed information. Parameter Function Video setup It is to adjust monitor video brightness. Note: 93