IC Realtime NVR-604V Product Manual - Page 34
GUI Operation
View all IC Realtime NVR-604V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
6 GUI Operation Connect the device to the monitor and then connect a mouse and power cable. Click the power button at the rear panel and then boot up the device to view the analog video output. You can use the mouse to implement some GUI operation. 6.1 Login After device booted up, the system is in multiple-channel display mode. See Figure 6-1.Please note the displayed window amount may vary. The following figure is for reference only. Figure 6-1 You can use USB mouse to input. Click to switch between numeral, English character (small/capitalized) and denotation. Note: For security reason, please modify password after you first login. Within 30 minutes, three times login failure will result in system alarm and five times login failure will result in account lo Figure 6-2 You can overlay the corresponding date, time and channel name on each screen. You can refer to the following sheet for channel record or alarm status information. 1 Recording status 3 Video loss 2 Motion detection 4 Camera lock 25