IC Realtime NVR-604V Product Manual - Page 125
PTZ
View all IC Realtime NVR-604V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Figure 8-42 Detect Please refer to the following sheet for detailed information. Parameter Function Event type Channel Sensitivity Enable button Region Period Anti-dither Alarm output: s. Record channel Send email Tour Motion detect, video loss and video masking select the channel to activate recording function System supports 6 levels. The sixth level has the highest sensitivity. Tick to enable There are PAL22X18/NTSC22X15 small zones. Blue area is the detection zone. Right click to view in full screen, click OK before exit to save the setup. Here you can set for business day and non-business day. Range: 0~600 when alarm occurred, system enables peripheral alarm device Select the recording channel (can be selected more than once) , this channel will be activated to record when alarm occurs. System can send out email to alert you when alarm occurs. Here you can enable tour function when alarm occurs. PTZ activation Here you can set PTZ movement when alarm occurs. Such as go to preset, tour &pattern when there is an alarm. Capture You need to input capture channel number so that system can backup snapshot file when alarm occurs. 8.4.2.2 PTZ PTZ interface is shown as in Figure 8-43 Please note, before operation please make sure you have set speed dome address and the NVR 116