Icom A25 Navigation Guide - A25n - Page 2
Keys Used For, Navigation Function
View all Icom A25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Bluetooth® OPERATION (Continued) DDPairing with a Low Energy device Pair a Low Energy (LE) device, as shown below. 1. Push [MENU]. 2. Select "LE Device," and then push [ENT]. (B luetooth > Pairing/Connect > Search Device > LE Device) 3. Perform pairing from the LE device within 2 minutes. L The remaining time is displayed. DDDisconnecting a paired device You can disconnect a paired Bluetooth device if it is not used. 1. Push [MENU]. 2. Select "Pairing/Connect." (Bluetooth > Pairing/Connect) ••Paired devices are displayed. L"(Connect)" is displayed, if a device is connected. 3. S elect a device to disconnect, and then push [ENT]. ••The screen as shown to the right is displayed. DDUnpairing a device Before unpairing a connected headset or device, disconnect it. 1. Push [MENU]. 2. Select "Pairing/Connect." (Bluetooth > Pairing/Connect) ••Paired devices are displayed. 3. S elect a device to disconnect, and then push [ENT]. ••The screen as shown to the right is displayed. 4. Select "Unpair," and then push [ENT].* *A confirmation dialog is displayed. 5. Push [MENU] to return to the Main screen. DDBluetooth settings You can customize the Bluetooth settings on the "Settings" screen. Refer to The FULL MANUAL for details. ([MENU] > Bluetooth > Settings) KEYS USED FOR NAVIGATION FUNCTION Push [F], and then push another key to use the secondary functions listed below. q w e t 4. Push [ENT].* *A confirmation dialog is displayed. 5. Push [MENU] to return to the Main screen. r q OMNI BEARING SELECTOR [1]/[OBS] Push to enter the Omni Bearing Selector (OBS) mode, to set the course heading. w TO/FROM SELECTOR KEY [2]/[TO FROM] Push to change the "TO/FROM" indicator and invert the OBS setting on the Course Deviation Indicator (CDI) screen. e WAYPOINT NAVIGATION KEY [4]/[WPT NAV] Push to display the Waypoint Navigation screen.* *Only when a waypoint or a flight plan is selected. r DIRECT-TO KEY [5]/[ ] Push to display the "Direct-To WPT" screen, to enter a waypoint. t FLIGHT PLAN KEY [6]/[FPL] Push to display the current flight plan.* *Only when a flight plan is selected. - 2 -