Icom A25 Navigation Guide - A25n - Page 4

Waypoint Navigation

Get Icom A25 PDF manuals and user guides View all Icom A25 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

WAYPOINT NAVIGATION The transceiver assists you to navigate to the selected destination, or follow your flight plan. LThe function works only when the transceiver's GPS receiver is receiving valid GPS signals from satellites. DDWaypoint Navigation screen The transceiver has 2 types of Waypoint Navigation screens, as shown below. You can change the screen type on the "Navigation Style" screen. ([MENU] > WPT Navigation > Settings > Navigation Style). Normal type Icon area CDI type Navigation area  Icon Area Refer to the BASIC MANUAL for details.  Navigation Area WAYPOINT NAME INDICATOR Displays the waypoint name. L" " is displayed, when a waypoint is selected from a flight plan. L" " is displayed, when the waypoint is manually selected. ETE INDICATOR Displays the Estimated Time Enroute (ETE). SOG INDICATOR Displays the Speed Over Ground (SOG). DISTANCE INDICATOR Displays the distance to the destination. RANGE INDICATOR (For only the Normal screen) Displays the display range. GPS ICON ••Displayed when valid position data is received. ••Blinks while searching for satellites or calculating position data. HEADING INDICATOR Displays your heading. (For only the Normal screen) DESTINATION ICON (For only the Normal screen) Displays the destination. DDSelecting a waypoint The transceiver assists you to navigate to a selected waypoint. Select a waypoint to use as a destination, as shown to the right.  Selecting a waypoint from the memory 1. P ush [F], and then push [ ] to display the "Direct-To WPT" screen. 2. Select "Select Memory," and then push [ENT]. ••The "Group List" screen is displayed. 3. Select a group, and then push [ENT]. ••Waypoints saved in the selected group are listed. 4. Select a waypoint, and then push [ENT]. ••The "Course To" screen is displayed.* 5. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed.  Selecting a waypoint from a flight plan 1. P ush [F], and then push [ ] to display the "Direct-To WPT" screen. 2. Select "Flight Plan," and then push [ENT]. ••The "Flight Plan" screen is displayed. 3. Select a flight plan, and then push [ENT]. ••Waypoints included in the selected flight plan are displayed. 4. Select a waypoint, and then push [ENT]. ••The "Course To" screen is displayed.* 5. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed.  Selecting a waypoint near your position 1. P ush [F], and then push [ ] to display the "Direct-To WPT" screen. 2. Select "Near Waypoint," and then push [ENT]. ••The transceiver searches for waypoints. ••The "Near Waypoint" screen is displayed, if waypoints are found. 3. Select a waypoint, and then push [ENT]. ••The "Course To" screen is displayed.* 4. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed.  Setting a waypoint manually 1. P ush [F], and then push [ ] to display the "Direct-To WPT" screen. 2. Select "Manual Entry," and then push [ENT]. ••The "Latitude" screen is displayed. 3. Enter the latitude, and then push [ENT]. ••The "Longitude" screen is displayed. 4. Enter the longitude, and then push [ENT]. ••The "Magnetic Vari" screen is displayed. 5. Enter the magnetic variation, and then push [ENT]. ••The "Course To" screen is displayed.* 6. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed.  Selecting a waypoint from history 1. P ush [F], and then push [ ] to display the "Direct-To WPT" screen. 2. Select "History," and then push [ENT]. ••The "History" screen is displayed. 3. Select a waypoint, and then push [ENT]. ••The "Course To" screen is displayed.* 4. Enter the course, and then push [ENT].* ••The Waypoint Navigation screen is displayed. *The course entry is required only when the CDI type Navigation screen is selected. NOTE: IC-A25N and IC-A25NE's Waypoint Navigation features are supplemental aids to navigation only, and are not intended to be a substitute for primary Waypoint Navigation equipment. - 4 - 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A7388D-2EX  Printed in Japan © 2017 Icom Inc.

  • 1
  • 2
  • 3
  • 4
A7388D-2EX
Printed in Japan
© 2017
Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
WAYPOINT NAVIGATION
- 4 -
The transceiver assists you to navigate to the selected
destination, or follow your flight plan.
L
The function works only when the transceiver
’
s GPS receiver is
receiving valid GPS signals from satellites.
D
Waypoint Navigation screen
The transceiver has 2 types of Waypoint Navigation
screens, as shown below. You can change the screen type
on the “Navigation Style” screen.
([MENU] > WPT Navigation > Settings >
Navigation Style
).
Icon Area
Refer to the BASIC MANUAL for details.
Navigation Area
WAYPOINT NAME INDICATOR
Displays the waypoint name.
L
“
” is displayed, when a waypoint is selected from a flight plan.
L
“
” is displayed, when the waypoint is manually
selected.
ETE INDICATOR
Displays the Estimated Time Enroute (ETE).
SOG INDICATOR
Displays the Speed Over Ground (SOG).
DISTANCE INDICATOR
Displays the distance to the destination.
RANGE INDICATOR
(For only the Normal screen)
Displays the display range.
GPS ICON
• Displayed when valid position data is received.
• Blinks while searching for satellites or calculating position
data.
HEADING INDICATOR
(For only the Normal screen)
Displays your heading.
DESTINATION ICON
(For only the Normal screen)
Displays the destination.
D
Selecting a waypoint
The transceiver assists you to navigate to a selected
waypoint.
Select a waypoint to use as a destination, as shown to the
right.
NOTE:
IC-A25N and IC-A25NE’s Waypoint Navigation
features are supplemental aids to navigation only, and
are not intended to be a substitute for primary Waypoint
Navigation equipment.
Icon
area
Navigation area
Normal type
CDI type
Selecting a waypoint from the memory
1.
Push [F], and then push [
] to display the “Direct-To
WPT” screen.
2.
Select “Select Memory,” and then push [ENT].
• The “Group List” screen is displayed.
3.
Select a group, and then push [ENT].
• Waypoints saved in the selected group are listed.
4.
Select a waypoint, and then push [ENT].
• The “Course To” screen is displayed.*
5.
Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
Selecting a waypoint from a flight plan
1.
Push [F], and then push [
] to display the “Direct-To
WPT” screen.
2.
Select “Flight Plan,” and then push [ENT].
• The “Flight Plan” screen is displayed.
3.
Select a flight plan, and then push [ENT].
•
Waypoints included in the selected flight plan are displayed.
4.
Select a waypoint, and then push [ENT].
• The “Course To” screen is displayed.*
5.
Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
Selecting a waypoint near your position
1.
Push [F], and then push [
] to display the “Direct-To
WPT” screen.
2.
Select “Near Waypoint,” and then push [ENT].
• The transceiver searches for waypoints.
• The “Near Waypoint” screen is displayed, if waypoints are
found.
3.
Select a waypoint, and then push [ENT].
• The “Course To” screen is displayed.*
4.
Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
Setting a waypoint manually
1.
Push [F], and then push [
] to display the “Direct-To
WPT” screen.
2.
Select “Manual Entry,” and then push [ENT].
• The “Latitude” screen is displayed.
3.
Enter the latitude, and then push [ENT].
• The “Longitude” screen is displayed.
4.
Enter the longitude, and then push [ENT].
• The “Magnetic Vari” screen is displayed.
5.
Enter the magnetic variation, and then push [ENT].
• The “Course To” screen is displayed.*
6.
Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
Selecting a waypoint from history
1.
Push [F], and then push [
] to display the “Direct-To
WPT” screen.
2.
Select “History,” and then push [ENT].
• The “History” screen is displayed.
3.
Select a waypoint, and then push [ENT].
• The “Course To” screen is displayed.*
4.
Enter the course, and then push [ENT].*
• The Waypoint Navigation screen is displayed.
*The course entry is required only when the CDI type Navigation
screen is selected.