Icom D-STAR Instruction Manual - Page 26
<e.g.: When driver re-installation is required>
View all Icom D-STAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4 DRIVER INSTALLATION D Microsoft® Windows® 98SE/Me Click Click q Start up Windows. w Connect the PC and the ID-RP2000V [SERVICE T] connector through a USB cable (A-B type; purchase separately). e Right click "My Computer" then select "Properties." r "System Properties" screen appears as at left. Click [Device Manager] tub. t Click " " of Ports (COM&LPT). Check the connected unit and connector names, and COM port number. (In this example, the USB serial port number is "3.") y Confirm "ICOM ID-RP2000V SERVICE T (COM✱)" is displayed. • If not displayed, or few COM port numbers are displayed at the same time, the driver installation may not be installed properly. Un-install the USB driver then reinstall the driver again in such cases. NOTE: "✱" is the COM port number, that is used for the communication setting with the utility software. "ICOM ID-RP2000V SERVICE T (COM✱) (COM✱)" 23