Icom D-STAR Instruction Manual - Page 29

4 DRIVER INSTALLATION D Microsoft® Windows Vista™ Manual un-installation from each unit and connector is needed when using Microsoft® Windows Vista™. In this section, describes the un-installation instruction with the ID-RP2000V [SERVICE T] for example. Click q Start up Windows. w Connect the PC and the ID-RP2000V [SERVICE T] connector through a USB cable. e Open the "Device Manager" screen. • See "■ COM port confirmation (p 24)" to open the "Device Manager" with Microsoft® Windows Vista™. r Click " " of Ports (COM&LPT). Right click the "ICOM ID-RP2000V SERVICE T (COM✱)" , then select "Uninstall". Click Click Click t Click to add the check mark, "✔," into "Delete the driver software for this device." then click [OK]. y Right click the "ICOM ID-RP2000V SERVICE✱" , then select "Uninstall". u Click to add the check mark, "✔," into "Delete the driver software for this device." then click [OK]. NOTE: Un-install the USB drivers for ID-RP2000V [SERVICE R] with the same manner. 26