Icom D-STAR Instruction Manual - Page 27

Connect the PC and the ID-RP2000V [SERVICE T]

Get Icom D-STAR PDF manuals and user guides View all Icom D-STAR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

D Microsoft® Windows Vista™ Click 4 DRIVER INSTALLATIONS q Start up Windows. w Connect the PC and the ID-RP2000V [SERVICE T] connector through a USB cable (A-B type; purchase separately). e Right click "Computer" then select "Properties." • "Computer" is available in menu with Windows Vista. r "System Properties" screen appears as at left. Click [Device Manager]. t In case "User Account Control" dialog box appears as at left, click [Continue]. Click Click y "Device Manager" screen appears. Click " " of Ports (COM&LPT). Confirm "ICOM ID-RP2000V SERVICE T (COM✱)" is displayed. • If not displayed, or few COM port numbers are displayed at the same time, the driver installation may not be installed properly. Un-install the USB driver then re-install the driver again in such cases. Check the connected unit and connector names, and COM port number. (In this example, the USB serial port number is "4.") NOTE: "✱" is the COM port number, that is used for the communication setting with the utility software. "ICOM ID-RP2000V SERVICE T (COM✱) (COM✱)" 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
24
4
DRIVER INSTALLATIONS
D
Microsoft
®
Windows Vista™
q
Start up Windows.
w
Connect the PC and the ID-RP2000V [SERVICE T]
connector through a USB cable
(A-B type; purchase
separately)
.
e
Right click “Computer” then select “Properties.”
•
“Computer” is available in <Start> menu with Windows
Vista.
r
“System Properties” screen appears as at left.
Click [Device Manager].
t
In case "User Account Control" dialog box appears
as at left, click [Continue].
y
“Device Manager” screen appears.
Click “
” of Ports (COM&LPT).
Confirm “ICOM ID-RP2000V SERVICE T (COM
✱
)”
is displayed.
•
If not displayed, or few COM port numbers are
displayed at the same time, the driver installation may
not be installed properly. Un-install the USB driver then
re-install the driver again in such cases.
NOTE:
“
✱
” is the COM port number, that is
used for the communication setting with the
utility software.
<e.g.: When driver re-installation is required>
“ICOM ID-RP2000V SERVICE T (COM
✱
) (COM
✱
)”
Click
Click
Click
Check the connected unit and connector names,
and COM port number.
(In this example, the USB serial port number is “4.”)