Icom F5021 / F6021 Instruction Manual - Page 11
BASIC OPERATION, ■ Turning power ON, ■ Channel selection
View all Icom F5021 / F6021 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2 BASIC OPERATION ■ Turning power ON ■ Channel selection 1 2 q Push [ ] to turn the power ON. Several types of channel selections are available. Methods w If the transceiver is programmed for a start up password, may differ according to your system set up. 3 input the digit codes as directed by your dealer. • The keys as below can be used for password input: NON-ZONE TYPE: 4 The transceiver detects numbers in the same block as identical. Push [CH Up] or [CH Down] to select the desired operating 5 Therefore "01234" and "56789" are the same. channel, in sequence; or, push one of [MR-CH 1] to [MR-CH 4] keys to select a channel directly. 6 KEY 7 NUMBER 0 1 2 3 4 56789 ZONE TYPE: Push [Zone], then push [CH Up] or [CH Down] to select the 8 desired zone. 9 AUTOMATIC SCAN TYPE: 10 e W hen the "PASSWORD" indication does not clear after inputting 4 digits, the input code number may be incorrect. Channel setting is not necessary for this type. When turning power ON, the transceiver automatically starts scanning. 11 Turn the power off and start over in this case. Scanning stops when receiving a call. 12 13 14 15 16