Icom F5021 / F6021 Instruction Manual - Page 7
■ Programmable function keys
View all Icom F5021 / F6021 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
PANEL DESCRIPTION 1 ■ Programmable function keys 1 The following functions can be assigned to [UP], [DOWN], SCAN A START/STOP KEY 2 [P0], [P1], [P2] and [P3] programmable function keys. ➥ Push to start and cancel scanning operation. 3 Consult your Icom dealer or system operator for details concerning your transceivers programming. • When Power ON Scan function is activated, push to pause the scanning operation. And the paused scan resumes after the 4 If the programmable function names are bracketed in the following explanations, the specific key is used to activate the specified time period has passed. ➥ Push and hold this key for 1 sec. to indicate the scan list, 5 function depends on the programming. then push [CH Up] or [CH Down] to select the desired list. 6 CH UP AND DOWN KEYS ➥ Push to select an operating channel. SCAN B START/STOP KEY 7 ➥ Push to start and cancel scanning operation. 8 ➥ Push to select a transmit code channel after pushing [TX Code CH Select]. The scan restarts after the specified time period has passed when the scan (started with this key) is cancelled 9 ➥ Push to select a DTMF channel after pushing [DTMF Au- by except for this key operation. 10 todial]. ➥ Push to select a scan group after pushing and holding ➥ Push and hold this key for 1 sec. to indicate the scan list, then push [CH Up] or [CH Down] to select the desired list. 11 [Scan A Start/Stop]/[Scan B Start/Stop] for 1 sec. 12 SCAN ADD/DEL (TAG) KEY ZONE KEY ➥ Push to add/delete the selected channel to/from the scan 13 Push this key, then select the desired zone using [CH Up]/ [CH Down]. list. 1. Push to indicate the scan group, then push [CH Up] or 14 [CH Down] to select the desired list. 15 2. P ush to add or delete the channel to/from the selected scan list. What is "zone"?- Selected channels are assigned to a 3. Push and hold for 1 sec. to exit the scan list selection mode. 16 zone according to how they are to be used in a group. ➥ Push this key while scan is paused (a signal is detected) For example, 'Staff A' and 'Staff B' are assigned into a on a channel (except for priority channel), the channel is "Business" zone, and 'John' and 'Cindy' are assigned into cleared from the scan list. a "Private" zone. D epending on the setting, the cleared channel is added to the scan list again after the scan is cancelled.