Icom F5021 / F6021 Instruction Manual - Page 15

BASIC OPERATION 2 ■ User set mode 2 User set mode can be accessed with 'Power ON' function. In e P ush [P0] several times to select the appropriate item. this case, all set mode items are available. Then, push [Up] or [Down] to set the desired level/condi- User set mode allows you to set seldom-changed settings tion. and you can "customize" the transceiver operation to suit • Available set mode functions are Backlight, Beep, Beep Level, your preferences and operating style. SQL Level, AF Min Level, Mic Gain, Horn, Battery Voltage, Signal Moni and Lone Worker. Entering the user set mode: q W hile pushing and holding [P1] and [P2], push [ ] to turn the power ON. • Turn power OFF in advance. • Push and hold [P1] and [P2] continuously until "SET MODE" appears on the display. [P0] [Up]/[Down] r P ush and hold [ ] for 1 sec. to turn power OFF, then ON again to exit set mode. [P1] [P2] [ ] w P ush and hold [P0] for 1 sec. to enter user set mode. [P0] [ ] User set mode is also available using a programmable key. Please refer to p. 6 [User Set Mode] section for instructions regarding using the key assigned for user set mode. [User Set Mode] is allowed for the quick item selection. Set "Enable" for the often used items with the CS-F3020/F5020 cloning software. 11