Icom GM800 Instruction Manual - Page 13
PREPARATION, ■ Entering the MMSI code, Entering
View all Icom GM800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3 PREPARATION ■■Entering the MMSI code First, you must enter your 9 digit MMSI (Maritime Mobile Service Identity: DSC self ID) code at power ON. You can perform this initial code entry ONLY ONCE. After entry, only your dealer or distributor can change it. If you have already entered your MMSI code, these procedures are not necessary. Example: Entering the MMSI code (123456789). 1. Hold down [ ] for 1 second to turn ON the transceiver. ••Three short beeps sound. ••"Push [ENT] to Register Your MMSI" is displayed. 2. Push [ENT]. NOTE: Push [CLR] to cancel the entry. In that case, the transceiver displays "Push [ENT] to Register Your MMSI" again. 3. Enter your 9 digit MMSI code. Push + Rotate CRHo/tGatRe P to select aCcHh/aGrRacPter 4. After entering the 9th digit, push [ENT]. + Push • The MMSI CONFIRMATION screen is displayed. 5. Reenter your MMSI code to confirm. Push + Rotate CH/GRP tRo ostealteect a character CH/GRP 6. After entering the 9th digit, push [ENT]. + Push 1 2 3 4 • The MMSI code is registered. 5 NOTE: When you successfully enter your MMSI code, the 6 following screen is displayed. 7 8 9 10 After that, the Main screen is displayed. The registered MMSI code is displayed at the top of the 11 screen. 12 LLInformatio 13 Rotate CH/GRP : Rotate [CH/GRP] to select. 14 Push : Push [ENT] to enter or set. 15 Push : Push the keypad keys to enter a digit or text. 16 17 Quick Reference 8