Icom IC-705 Advanced Manual english - Page 126
GPS SET, GLONASS, Power Save, Satellite Information Out, Manual Position
View all Icom IC-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
12. GPS OPERATION (ADVANCED) GPS SET NOTE: The default settings shown below are for the USA transceiver version. The default settings may differ, depending on your transceiver version. To return to your transceiver version's default settings, push and touch "Default." » GPS > GPS Set GPS Select (Default: ON) Selects how to capture position data. •• OFF: A GPS receiver is not used. •• ON: Position data of the internal GPS receiver is used for the GPS functions. •• Manual: M anually enter the current Latitude, Longitude, and Altitude in "Manual Position." » GPS > GPS Set > GPS Option SBAS (Default: OFF) Turns the SBAS (Satellite Based Augmentation System) function ON or OFF. LLWhen turning ON this function, the GPS position accuracy can be improved, but the transceiver's battery is quickly exhausted. •• OFF: T urns OFF the function. •• ON: Turns ON the function. GLONASS (Default: OFF) Selects whether or not to use the data from the GLONASS (GLObal'naya NAvigatsionnaya Sputnikovaya Sistema) satellites. LLWhen turning ON this function, the GPS position accuracy can be improved, but the transceiver's battery is quickly exhausted. •• OFF: D oes not use the data from the GLONASS satellites. •• ON: Uses the data from the GLONASS satellites. Power Save (Default: Auto) Selects whether or not to use the Power Save function for the internal GPS receiver. When this function is ON, and if the GPS receiver does not receive signals from a satellite for 5 minutes, the function turns OFF the GPS receiver for this set period of time. •• OFF: The GPS receiver is always turned ON. •• 1, 2, 4, 8min: When the receiver cannot receive signals from a satellite for 5 minutes, the GPS receiver is turned OFF for the selected period of time. (1, 2, 4, or 8 minutes). After this period, the receiver resumes receiving. •• Auto: When the receiver cannot receive signals from a satellite for 5 minutes, the GPS receiver is turned OFF for 1 minute. After this period, the receiver resumes receiving. The Power Save interval time extends to 2, 4, and then 8 minutes when receiving no signals for another 5 minutes, respectively. Satellite Information Out (Default: GPS/QZSS/GLONASS) Selects whether or not to output the data from the QZSS (Quasi-Zenith Satellite System) satellites and the GLONASS satellites. •• GPS/QZSS/GLONASS: Outputs the data from the GPS satellites, the QZSS satellites, and the GLONASS satellites. •• GPS Only: O utputs the data from only the GPS satellites. » GPS > GPS Set Manual Position (Default: LATITUDE: 0°00.00′N, LONGITUDE: 0°00.00′W, ALTITUDE: ------ft) Manually enter the latitude, longitude, and Altitude of your current position. LLYou can capture position data from the GPS receiver if "Capture From GPS" is selected. 12-32