Icom IC-705 Basic Manual english - Page 69

USB SEND, USB Keying CW, VOICE, KEYER, CI-V Address, CI-V Transceive, CI-V USB Echo Back, USBFunction

Get Icom IC-705 PDF manuals and user guides View all Icom IC-705 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

SET MODE 8 » SET > Connectors > USB SEND/Keying TIP: This is the setting for the terminal used for data communication when you operate the transceiver using software on a PC. When you connect the transceiver to the PC with a USB cable, 2 COM ports are recognized on the PC. To confirm USB (A)/USB (B), open the COM port properties, and confirm the "Value" on the "Details" tab. USB SEND (Default: OFF) Sets the USB terminal of the transceiver to receive the SEND signal from the software on the PC. Select the same terminal as the terminal set by the software. LLYou cannot select the terminal which is already selected in the "USB Keying (CW)" or "USB Keying (RTTY)" item. USB Keying (CW) (Default: OFF) Sets the USB terminal of the transceiver to receive the CW Keying signal from the software on the PC. Select the same terminal as the terminal set by the software. LLYou cannot select the terminal which is already selected in the "USB SEND" or "USB Keying (RTTY)" item. USB Keying (RTTY) (Default: OFF) Sets the USB terminal of the transceiver to receive the RTTY Keying signal from the software on the PC. Select the same terminal as the terminal set by the software. LLYou cannot select the terminal which is already selected in the "USB SEND" or "USB Keying (CW)" item. » SET > Connectors > External Keypad VOICE (Default: OFF) KEYER RTTY (Default: OFF) (Default: OFF) Enables each memory (voice, keyer, RTTY) transmission using an external keypad. » SET > Connectors > CI-V CI-V Address (Default: A4) Sets the CI-V address in hexadecimal code. LL"A4" is the default address of the IC-705. CI-V Transceive (Default: ON) Turns the Transceive function ON or OFF. •• OFF: The status is not output. •• ON: The status is output. When you change a setting on the transceiver, the same change is automatically set on other connected transceivers or receivers, and vice versa. CI-V USB Echo Back (Default: OFF) Turns the Data Echo Back function ON or OFF, when remotely controlling the IC-705 through the [microUSB] CI-V port. » SET > Connectors > USB (B) Function 8 USB (B) Function (Default: OFF) The transceiver has 2 virtual COM ports, A and B. In this item, sets the function to be assigned to USB (B). LLUSB (A) is used for programming, or CI-V operation. LLWhen connecting to a USB port on your PC that is installed the USB driver, USB (A) and USB (B) are named as "IC-705 Serial Port A (CI-V)" and "IC-705 Serial Port B." •• OFF: Does not assign the function to USB (B). •• RTTY Decode: O utputs the decoded data of the RTTY signal. •• DV Data: Inputs or outputs low speed data for the DV mode. •• Weather: Inputs the weather data entries. GPS Out (Default: OFF) Selects whether or not to output the position data to USB (B). •• OFF: Does not output the position data to USB (B). •• DATA→USB (B): O utputs the position data to USB (B). LLIt is valid when "USB (B) Function" is set to "OFF" or "DV Data." » SET > Connectors MIC Jack 8V Output (Default: OFF) Selects whether or not to output 8 V from the [MIC] jack. •• OFF: Output 3.3 V from the [MIC] jack. •• ON: Output 8 V from the [MIC] jack. BASIC MANUAL 8-16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
8-16
BASIC MANUAL
SET MODE
8
8
»
SET > Connectors >
USB SEND/Keying
TIP:
This is the setting for the terminal used
for data communication when you operate the
transceiver using software on a PC.
When you connect the transceiver to the PC
with a USB cable, 2 COM ports are recognized
on the PC.
To confirm USB (A)/USB (B), open the COM
port properties, and confirm the “Value” on the
“Details” tab.
USB SEND
(Default: OFF)
Sets the USB terminal of the transceiver to
receive the SEND signal from the software
on the PC. Select the same terminal as the
terminal set by the software.
L
You cannot select the terminal which is already
selected in the “USB Keying (CW)” or “USB
Keying (RTTY)” item.
USB Keying (CW)
(Default: OFF)
Sets the USB terminal of the transceiver to
receive the CW Keying signal from the software
on the PC. Select the same terminal as the
terminal set by the software.
L
You cannot select the terminal which is already
selected in the “USB SEND” or “USB Keying
(RTTY)” item.
USB Keying (RTTY)
(Default: OFF)
Sets the USB terminal of the transceiver to
receive the RTTY Keying signal from the
software on the PC. Select the same terminal
as the terminal set by the software.
L
You cannot select the terminal which is already
selected in the “USB SEND” or “USB Keying
(CW)” item.
»
SET > Connectors >
External Keypad
VOICE
(Default: OFF)
KEYER
(Default: OFF)
RTTY
(Default: OFF)
Enables each memory (voice, keyer, RTTY)
transmission using an external keypad.
»
SET > Connectors >
CI-V
CI-V Address
(Default: A4)
Sets the CI-V address in hexadecimal code.
L
“A4” is the default address of the IC-705.
CI-V Transceive
(Default: ON)
Turns the Transceive function ON or OFF.
• OFF: The status is not output.
• ON:
The status is output. When you change
a setting on the transceiver, the same
change is automatically set on other
connected transceivers or receivers,
and vice versa.
CI-V USB Echo Back
(Default: OFF)
Turns the Data Echo Back function ON or OFF,
when remotely controlling the IC-705 through
the [microUSB] CI-V port.
»
SET > Connectors >
USB (B) Function
USB (B) Function
(Default: OFF)
The transceiver has 2 virtual COM ports, A and
B. In this item, sets the function to be assigned
to USB (B).
L
USB (A) is used for programming, or CI-V
operation.
L
When connecting to a USB port on your PC that is
installed the USB driver, USB (A) and USB (B) are
named as “IC-705 Serial Port A (CI-V)” and “IC-705
Serial Port B.”
• OFF:
Does not assign the function
to USB (B).
• RTTY Decode:
Outputs the decoded data of
the RTTY signal.
• DV Data:
Inputs or outputs low speed
data for the DV mode.
• Weather:
Inputs the weather data entries.
GPS Out
(Default: OFF)
Selects whether or not to output the position
data to USB (B).
• OFF:
Does not output the position
data to USB (B).
•
±ATA→USB (B):
Outputs the position data to
USB (B).
L
It is valid when “USB (B) Function” is set to “OFF”
or “DV Data.”
»
SET >
Connectors
MIC Jack 8V Output
(Default: OFF)
Selects whether or not to output 8 V from the
[MIC] jack.
• OFF: Output 3.3 V from the [MIC] jack.
• ON:
Output 8 V from the [MIC] jack.