Icom IC-705 Basic Manual english - Page 70
Display, Screen Saver DC 13.8 V
View all Icom IC-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
8 SET MODE Display » SET > Display LCD Backlight (Default: 50%) Sets the LCD backlight brightness. LLWhen "(Auto Adjusting)" is displayed to the right of the screen title, the backlight brightness is automatically adjusted using the ambient light sensor. Touching [Auto Adjust] turns this function ON or OFF. Screen Saver (Battery Pack) (Default: 5min) Screen Saver (DC 13.8 V) (Default: 60min) Sets the Screen Saver function when using the battery pack and using using an external DC power supply. This function activates and automatically turns OFF the screen when no operation is performed for the preset period of time. Screen OFF [POWER] Switch (Default: ON) Selects whether or not to turn OFF the screen by pushing . •• OFF: Pushing does not turn OFF the screen. •• ON: Pushing turns OFF the screen. LLWhen both "Screen Capture [POWER] Switch" and "Screen OFF [POWER] Switch" are set to ON, pushing displays the dialog to select "Screen OFF" or "Screen Capture." RX LED (Default: ON) Selects whether or not to light the TX/RX indicator while receiving a signal, or the squelch is open. To conserve battery power, turn OFF this function. LLThe indicator lights red while transmitting, regardless of the setting. Meter Peak Hold (Default: ON) Turns the Meter Peak Hold function ON or OFF. Memory Name (Default: ON) Turns the Memory name display in the Memory mode ON or OFF. Group Name Popup (Default: ON) Selects whether or not to display the group name when you change the memory channel group. RX Call Sign Display (Default: Normal) In the DV mode, selects whether or not to display the call sign and the message of the caller station when a call is received. •• OFF: Does not display the caller station's call sign and message. •• Normal: The caller station's call sign and message automatically scroll once, and then disappear. •• RX Hold: The caller station's call sign and message automatically scroll once, and then the call sign is displayed on the transceiver's display until the signal disappears. •• Hold: The caller station's call sign and message automatically scroll once, and then the call sign is displayed on the transceiver's display until the signal disappears. When the signal disappears, the call sign and the message are each repeatedly displayed for 2 seconds. LLWhen "Normal," "RX Hold," or "Hold" is selected, and if the call sign and name of the caller station is programmed in your memory, the programmed name is displayed after displaying the call sign. RX Position Indicator (Default: ON) Selects whether or not to display the indicator when position data is included in the signal received in the DV mode. •• OFF: N o indicator is displayed, even though the position data is included in the received signal. •• ON: The indicator is displayed when the position data is included in the received signal. LLWhen "RX Call Sign Display" is set to "OFF," the indicator is not displayed, even though position data is included in the received signal. RX Position Display (Default: ON) Selects whether or not to display in a dialog when the caller station's position data is included in the signal received in the DV mode. •• OFF: No data is displayed in a dialog. •• ON: When the caller station's position data is included in the signal, its data is displayed in a dialog. LLThe time period to display the dialog depends on the "RX Position Display Timer" setting. 8-17 BASIC MANUAL