Icom IC-A25 Full Manual - Page 17
Keys used for, Navigation Function, Course Deviation Indicator, CDI screen, Using the Omni Bearing,
View all Icom IC-A25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
5 VOR NAVIGATION Keys used for Navigation Function The IC-A25N and IC-A25NE have the keys shown below to use the VOR Navigation function and Waypoint Navigation function. zzPush [F], and then push these keys to use the functions shown below. LLSee section 6 for Waypoint Navigation function's details. q w e t r q OMNI BEARING SELECTOR [1]/[OBS] Push to enter the Omni Bearing Selector (OBS) mode, to set the course heading. w TO/FROM SELECTOR KEY [2]/[TO FROM] Push to change the "TO/FROM" indicator and invert the OBS setting on the Course Deviation Indicator (CDI) screen. e WAYPOINT NAVIGATION KEY [4]/[WPT NAV] Push to display the Waypoint Navigation screen.* *Only when a waypoint or a flight plan is selected. r DIRECT-TO KEY [5]/[ ] Push to display the "Direct-To WPT" screen, to enter a waypoint. t FLIGHT PLAN KEY [6]/[FPL] Push to display the current flight plan.* *Only when a flight plan is selected. Course Deviation Indicator (CDI) screen The transceiver displays the CDI screen when the NAV band frequency is selected. y q w t r e q COMPASS ROSE w COURSE DEVIATION NEEDLE Displayed when a VOR signal is received. e DEVIATION MARKS r OBS VALUE INDICATOR Displays the course heading. t VOR VALUE INDICATOR Displays the heading to or from a VOR. y TO/FROM INDICATOR Using the Omni Bearing Selector (OBS) Use the Omni Bearing Selector, as shown below, to set the course heading. 1. Push [F], and then push [OBS] to enter the OBS mode. ••The OBS value is highlighted. 2. Rotate [DIAL], or push keypad keys to set the course heading. 3. Push [ENT] to save the adjusted course heading. 5-2