Icom IC-A25 Full Manual - Page 26
Scan types, Using the Scan function - ic a25n nav com transceiver
![]() |
View all Icom IC-A25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
7 SCAN OPERATION Using the Scan function 1. Push [F], and then push [SCAN] to start a scan. ••"SCANNING" blinks while scanning. LLRotate [DIAL] to change the scanning direction. LLWhen receiving a signal, the scan stops and "RX" is displayed. LLRotate [DIAL] to resume the scan, even if a signal is received. LLWhen a signal is disappeared, the transceiver automatically resumes the scan in 3 seconds. DDMemory channel scan Normal scan Repeatedly scans tagged memory channels belonging to the same group.* *Scans all memory channels, depending on the presetting. LLYou can tag or untag a memory channel on the "TAG Set" screen. ([MENU] > Manage Memory > Edit Memory > (Select a group) > (Select a channel) > TAG Set) (p. 8-6) Mch 1 Mch 2 Mch 3 Untagged channel Mch 200 2. Push [CLR] to cancel the scan. Scan types The transceiver have any one type of scan function as shown below, depending on the presettings. Ask your dealer for details. DDVFO scan Repeatedly scans all frequencies over the entire band. IC-A25N/IC-A25NE The transceiver scans the COM and NAV bands. LLMay not scans the NAV band, depending on the presettings. Ask your dealer for details. 108.000 MHz 118.000 MHz NAV band 136.9917 MHz COM band Scan Jump Priority scan While scanning, Priority watch checks for a signal on the selected Priority channel. LLYou can select a priority channel on the "Priority CH" screen. ([MENU] > Radio Settings > Priority CH) (p. 9-2) Priority channel Mch 1 Mch 2 Mch 3 Mch 200 Untagged channel IC-A25C/IC-A25CE The transceiver scans only the COM band. 108.000 MHz 118.000 MHz 136.9917 MHz Scan Jump 7-2
![](/manual_guide/products/icom-ica25-manual-542f86b/26.png)