Icom IC-A25 Full Manual - Page 45

11 MENU ITEMS Manage Memory DDEdit Memory ([MENU] > Manage Memory > Edit Memory) Edit the Memory channel contents. (p. 8-2) DDDelete Memory ([MENU] > Manage Memory > Delete Memory) Delete an unwanted memory channel. (p. 8-5)  User Type 1/User Type 2 Edit the type names ("U-1" and "U-2") that represent the Memory channel type. (p. 8-3) Radio Settings DDTime Out Timer ([MENU] > Radio Settings > Time Out Timer) Turn the Time Out Timer (TOT) function ON or OFF. This function limits continuous transmissions on the channel, to prevent from occupying the channel for a long period of time. ••OFF: Turns OFF the function. ••20 sec to 180 sec: Set the Time-out Timer to between 20 seconds and 180 seconds. DDWeather Alert (For only the IC-A25N and IC-A25C) ([MENU] > Radio Settings > Weather Alert) Turn the Weather Alert function ON or OFF. This function detects the weather alert tone on Weather channels. The National Oceanic and Atmospheric Administration (NOAA) broadcast station transmits a weather alert tone before any important weather information. (p. 9-3) ••OFF: The transceiver does not detect a Weather alert tone. ••ON: The transceiver detects the 1050 Hz weather alert tone on a Weather channel or on the previously selected Weather channel while scanning. DDWX CH TAG Set (For only the IC-A25N and IC-A25C) ([MENU] > Radio Settings > WX CH TAG Set) Select whether or not to tag each Weather channel. (p. 9-3) OFF: The channel is skipped while scanning. ON: The channel is scanned while scanning. DDDuplex Set ([MENU] > Radio Settings > Duplex Set) Select whether or not to use the Duplex function. (p. 9-4) LLThis item is displayed for all versions. However, it may be usable only in the USA. ••OFF: Turns OFF the function. ••ON: You can call a flight service station while receiving an NAV band frequency. DDDuplex TX Freq ([MENU] > Radio Settings > Duplex TX Freq) Enter the transmit frequency when the Duplex function is ON. DDVOX Set ([MENU] > Radio Settings > VOX Set) Turn the VOX function ON or OFF. The function automatically switches between receive and transmit by detecting your voice. ••OFF: Turns OFF the function. ••ON: Switches between receive and transmit by detecting your voice. DDVOX Delay ([MENU] > Radio Settings > VOX Delay) Set the VOX Delay to between 0.5 sec and 3.0 sec. The VOX Delay is the amount of time the transmitter stays ON after you stop speaking until the VOX switches to receive. DDVOX Level ([MENU] > Radio Settings > VOX Level) Set the VOX gain level to between 1 and 6. Higher values make the VOX function more sensitive to your voice. NOTE: You cannot switch the optional VS-3 Bluetooth headset to other devices, if the VOX level is set to 6. DDPriority CH ([MENU] > Radio Settings > Priority CH) Set the Priority channel. (p. 9-2) 11-6