Icom IC-F5011 / IC-F6011 Instruction Manual - Page 6

1 PANEL DESCRIPTION ■ Function LED q 1 2 3 4 TX/RX e w q CHANNEL INDICATORS ➥ Indicates the operating channel. ➥ Blinks when receiving a signal during a scan. ➥ All LEDs blink while entering the power ON password. w TX/RX INDICATOR ➥ Lights red while transmitting. ➥ Lights green while the channel is busy (receiving). ➥ Blinks orange when the specified 2-tone, 5-tone call is received. ➥ Alternately blinks green and red when a cloning error has occurred. e ACTIVATED KEY INDICATORS (P0/P1/P2) Lights when a pre-programmed key function is activated. NOTE: When the supplied DC voltage is high, all LEDs blink. Check the DC voltage. D MICROPHONE The supplied or optional microphone has a PTT switch and a hanger hook. • The following functions are available when the microphone is ON or OFF hook (depending on the preprogramming): - Automatic scan start when you put it ON hook. - Scan is cancelled when you take it OFF hook - Scan is paused when you take it OFF hook - Automatically selects the Priority A channel when you take it OFF hook. - Sets to 'Inaudible' mode (muted state) when you put it ON hook. - Sets to 'Audible' mode (unmuted state) when you take it OFF hook. 2