Icom IC-F5011 / IC-F6011 Instruction Manual - Page 7

PANEL DESCRIPTION 1 ■ Programmable function keys 1 The following functions can be assigned to [P0], [P1], [P2] PRIO A/B KEYS 2 and [P3] programmable function keys. Consult your Icom dealer or system operator for details con- ➥ Push to select Priority Channel A or B. ➥ To rewrite the operating channel as Priority A or Priority 3 cerning your transceivers programming. B, hold down [Prio A (Rewrite)] or [Prio B (Rewrite)] for 4 CH UP AND DOWN KEYS 1 second. 5 Push to select an operating channel. MR-CH 1/2/3/4 KEYS 6 SCAN A START/STOP KEY Push to directly select memory channels 1 to 4. 7 Push to start or cancel a scan. SCAN B START/STOP KEY MONI (AUDI) KEY 8 ➥ Push to turn the CTCSS (DTCS) or 2/5-tone squelch Mute ON or OFF. 9 Push to start or cancel a scan. When a scan started with the Power ON Scan or by pushing this key, push to cancel it. If the scan is cancelled except by pushing this key, the cancelled scan resumes after the specified time period. SCAN ADD/DEL (TAG) KEY While scan is paused by a detected signal, on a channel other than a priority channel, push this key to clear the channel from the scan list. • Only during LMR operation, hold down to open any squelch 10 functions, or deactivate any mute functions. • Only during PMR operation, push to activate one or two of the 11 following functions* on each channel. - Hold down to unmute the channel (Audible mode). 12 - Push to mute the channel (Inaudible mode). - Push to send a 'reset code' after the communication is fin- 13 ished. 14 *Ask your dealer for details. N OTE: After a specified period, the un-muted state ('Au- 15 dible' mode) may automatically return to the muted state 16 Depending on the preprogramming, the cleared channel is ('Inaudible' mode), depending on the preprogramming. added to the scan list again after the scan is cancelled. ➥ Hold down this key for 1 second to cancel a scan, depend- ing on the preprogramming. 3