Icom IC-F5021 Instruction Manual - Page 11

BASIC OPERATION, ■ Turning ON the transceiver, ■ Channel selection

Get Icom IC-F5021 PDF manuals and user guides View all Icom IC-F5021 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

2 BASIC OPERATION ■ Turning ON the transceiver ■ Channel selection 1 2 q Push [ ] to turn ON the transceiver. Several types of channels can be selected. Methods may w If the transceiver is programmed for a start up password, differ depending on your system set up. 3 input the digit codes as directed by your dealer. • The keys as shown below can be used for password input: NON-ZONE TYPE: 4 The transceiver detects numbers in the same block as identical. Push [CH Up] or [CH Down] to select the desired operating 5 Therefore "01234" and "56789" are the same. channel, in sequence, or, push one of [MR-CH 1] to [MR-CH 4] keys to directly select a channel. 6 KEY 7 NUMBER 0 1 2 3 4 56789 ZONE TYPE: Push [Zone], then push [CH Up] or [CH Down] to select the 8 desired zone. 9 AUTOMATIC SCAN TYPE: 10 e W hen the "PASSWORD" indication does not clear after inputting 4 digits, the input code number may be incorrect. Channel setting is not necessary for this type. When turning ON the transceiver, the transceiver automatically starts 11 Turn OFF the transceiver and start over in this case. scanning. Scanning stops when a call is received. 12 13 14 15 16 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
7
2
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Turning ON the transceiver
q
Push
[
]
to turn ON the transceiver.
w
If the transceiver is programmed for a start up password,
input the digit codes as directed by your dealer.
• The keys as shown below can be used for password input:
The transceiver detects numbers in the same block as identical.
Therefore “01234” and “56789” are the same.
e
When the “PASSWORD” indication does not clear after
inputting 4 digits, the input code number may be incorrect.
Turn OFF the transceiver and start over in this case.
■
Channel selection
Several types of channels can be selected. Methods may
differ depending on your system set up.
NON-ZONE TYPE:
Push [CH Up] or [CH Down] to select the desired operating
channel, in sequence, or, push one of [MR-CH 1] to [MR-CH 4]
keys to directly select a channel.
ZONE TYPE:
Push [Zone], then push [CH Up] or [CH Down] to select the
desired zone.
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning
ON the transceiver, the transceiver automatically starts
scanning. Scanning stops when a call is received.
KEY
NUMBER
0
5
4
9
3
8
2
7
1
6