Icom IC-F5021 Instruction Manual - Page 5
PANEL DESCRIPTION, ■ Front panel - programming
View all Icom IC-F5021 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1 PANEL DESCRIPTION ■ Front panel 1 2 q Function display (p. 2) w e Speaker 3 4 5 6 7 t 8 r 9 q AF VOLUME CONTROL KNOB [VOL] t MICROPHONE CONNECTOR 10 Rotate the knob to adjust the desired audio output level. • Minimum audio level is pre-set. (p. 11) Connect the supplied or optional microphone. NEVER connect non-specified microphones. The pin 11 w UP/DOWN KEYS [CH Up]/[CH Down] assignments may be different and the transceiver may 12 Push to select an operating channel, and so on. be damaged. 13 * The desired function can be assigned by your dealer. (p. 3) e POWER KEY [ ] Push to turn the transceiver ON or OFF. • The following functions can be used at power ON as options: - Automatic scan start - Password prompt - Set mode D MICROPHONE 14 The supplied or optional microphone has a PTT switch and a hanger hook. 15 • The following functions can be used when the microphone is on or off hook (depending on the setting): 16 - Automatic scan starts when it is on hook. - Scan is cancelled when it is off hook. r DEALER-PROGRAMMABLE KEYS - Scan is paused when it is off hook. Desired functions can be programmed independently by - A utomatic priority channel can be selected when it is off hook. your dealer. (p. 3) - Sets to 'Inaudible' condition (mute condition) when it is on hook. - Sets to 'Audible' condition (unmute condition) when it is off hook. 1