Icom IC-F5021 Instruction Manual - Page 8

1 PANEL DESCRIPTION SCAN ADD/DEL (TAG) KEY ➥ Push to add a channel to, or delete it from the current scan list. • When a channel is added to the current scan list, the display shows "SCAN ON." When a channel is deleted from the current scan list, the display shows "SCAN OFF." After showing "SCAN ON" or "SCAN OFF," the display shows the current scan list text. ➥ You can add a channel to, or delete it from the scan list after selecting the list. 1. Hold down for 1 second to display the current scan list, and then push [CH Up] or [CH Down] to select a desired list. 2. Push this key to add a channel to, or delete it from the selected list. • When a channel is added to the selected scan list, the display shows "SCAN ON." When a channel is deleted from the selected scan list, the display shows "SCAN OFF." 3. Hold down this key for 1 second to exit the scan list selection mode. ➥ Push this key while a scan is paused on a channel, except for primary or secondary channel, and then the channel is deleted from the scan list. • Depending on the setting, the deleted channel is added to the scan list again after the scan is cancelled. (Nuisance Delete function) PRIO A/B KEYS ➥ Push to select Priority A or Priority B channel. ➥ Hold down [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 second to rewrite the operating channel as the Priority A or Priority B channel. MR-CH 1/2/3/4 KEYS Push to select the memory channel 1 to 4 directly. MONI (AUDI) KEY ➥ P ush to mute and release the CTCSS (DTCS) or 2-Tone squelch mute. Open any squelch/deactivate any mute while holding down this key. (LMR operation only) ➥ A ctivates one of (or two of) the following functions on each channel independently: (PMR operation only) • Hold down to unmute the channel (audio is emitted; 'Audible' condition). • Push to mute the channel (sets to 'Inaudible' only). • Push after the communication is finished to send a 'reset code'. (5-Tone operation only) N OTE: The un-mute condition ('Audible' condition) may automatically return to the mute condition ('Inaudible' condition) after a specified period depending on programming. LOCK KEY Hold down to electronically lock all programmable keys except the following: [Moni(Audi)], [Lock], [Call] (incl. Call A and Call B), [Emergency], [Surveillance], [Siren], [Lone Worker] and [OPT 1/2/3]. LONE WORKER KEY Push to turn the Lone Worker function ON or OFF. • If the Lone Worker function is activated, the Emergency function is automatically turned ON after a specified period of time has passed with no operation is performed. 4